【ARCHI】Z900RS Custom Parts

It used formal displacement volume "948cc" of Z900RS as the motif. It adheres to textures and is made from die-casting aluminum.The easy fit which I stick with double-stick tape.

The right is the same as the left.

It is sold at 1pc each.

※ End of July

It can choose out of 2 positions.
1ST position STD + 20mm Up / 20 mm Back.
2ND position STD + 30mm Up / 30 mm Back.

●In order for breakage of a step bar to prevent it from becoming impossible to operate a pedal, the shift pedal and the axis of the step bar are divided.

●It adopt the sealed ball-bearing so that smooth pedal operation can be performed.

●The pedal bar is the reinforced plastic material.

●The rear master cylinder and the brake switch can use STD.

●Within mounting color, boly etc.

① Engine Head Mount Kit

It is using 17mm-thick aluminum.
The fixed portion is taper-like cone in order to distribute stress. There is the dressing effect up with the rigid improvement in the body.Please use the STD bolt.

●It is sale with a set by one right and left.

② Engine Cylinder Mount Kit

It modeled 3Ｄ complicated design from 40mm thick aluminum material. It treated the honeycomb design to each field and support the engine by high-durability and effect dress-up.
Please use STD bolt for attachment.

●It is sold by 2PC （right and left) per set, respectively.

 

It made from 13mm thickness aluminum.
For stress distribution, the mount part adopts taper-like cone, is in high durability, and supports the frame and suspension.
Please use STD bolt for attachment.

●It is sold by 2PC （right and left) per set, respectively.

The steel pipe back-step kit adhering to beauty and positioning as the high-end model of the Truss Rod series.
The position of the step bar is variable multi-position specification from which it become the maximum of a minimum of Min 45mm - Max 60mm in back, and it becomes the upper part movable of Min 10mm - Max 30mm by STD ratio. The step bar combines 80'S AMA Super Bike racer "Z1000S1" type retractable step bar, and has racy modeling and functional beauty. Please use STD shift and brake pedal together.

●It made by carbon steel (STKM) pipe.


●Iｔ can choose the position of the step bar from 9 positions.

Note ※About the rear master cylinder, the shift pedal, and the brake pedal. please use STD parts for Z900RS. ※The master cylinder hose should use cutting about 10 mm.

oose the position of the step bar from 9 positions.

●Please use STD rear master cylinder and the brake switch.

【Contents】
Truss Rod Step Base (Rh/Lh), Step Bar (Rh/Lh), Change Rod,

Step Adjuster (Rh/Lh), Pivot Nut, Attachment Bolt

Although the form of the lens is the same as STD, only in the edgeby position, and the whole emits light at breaking.
It is easy fit which exchange the whole tail lamp unit.
The color of the lens is two line-up of clear and smoke.

※ End of July

The tail cowl made by FRP and designed which suits Z900RS following the image of Z1.It is extended by 60 mm rather than STD.


● There are seven kinds, white gel coat as no-paint, and candy tone brown and metalic spark black eic. as genuine color.

● The rib is prepared inside Cowl and it looks high-class appearance,
and the durability of the FRP material is excellent.

 

	Color	Parts No.	Price
1	No-Paint (White Gel coated)	189-1330	￥26,000
2	Candy Brown	189-1331	￥37,000
3	Mtalic Spark Black	189-1332	￥37,000
4	Metalic Gray	189-1333	￥39,000
8	Lime Green	189-1338	￥38,000

	Color	Parts No.	Price
5	Candy Green (Tiger)	189-1334	￥39,000
6	Metalic Diablo Black ※1	189-1335	￥39,000

●Glab Bar Mount Spacer

In order to use together the glab bar and side grip of FRP long tail cowl , the mount position is lowered 10 mm.

The fenderless kit only for FRP long tail cowl.
The license plate as well as tail cowl 60 mm back.

●It suppresses 1 inch of overhangs to the outside of winkwe at inside.

●The 1.5mm SPHC steel cut down with the laser cutter is used. Special chromium processing which is excellent in corrosiveness-proof was carried out.

●The winker and license plate light are the designs which make it the double plate structure which served as reinforcement, and can use STD damper rubber.

● Since the blinker and the portion which fixes number light were made into double board structure, pure damper rubber can be used for it, respectively.

Parts No.	Price
189-1305	￥23,000

The Long Tail Cowl and Fenderless Kit Type-2 are required. Since it can equip with the taillight of Z1 type, Z900RS is further shown as "Z." The LED taillight emits light at 100% in braking, and emits light 45% in position lamp. Moreover, white LED is also built in for number light. The mount bracket part is a product made from SPHC steel, and black chromium is given to the surface treatment.

Note
※Processing of wiring is required. It cannot be used in STD tail cowl.
※ This product requires FRP Long Tail Cowl and Fenderless kit Type-2.

It changes with Z1 type winker & stem's wearing still like Z.
The winker is LED of orange luminescence.
The rear mount

---

bracket used SPHC steel, and has given black chromium to the surface treatment.
The front mounting bracket is a product made from aluminum, and the surface treatment is black alumite.
The winker, stems, and the mounting bracket are attached.
And you can choice short or long winker stem.

●IC Winker Relay

---

Parts No.	Opr-Spind	Price
156-4381	X	￥1,200
81-4382	〇	￥1,200

If this is used, a rear suspension will lie and seat hight will lei-down about 20 mm. In the product made from steel, the surface is black finished by bright chromate (as CrO3) .processing.

 

Parts No.	Price
189-5311	￥7,000

The frame of Z900RS is shown like the double cradle frame of the air cooled Z1.
The stability of Z900RS frame will be raised and the frame will stop twisting when the cornering or breaking.


●The material of main pipe is carbon steel pipe.

●Finish can be chosen from two kinds, satin chrome which is chromium without the gloss of satin, and black painted.

●Weight:2,700g

 

 

●Two variations of the FRP specification altogether made from FRP, and the hybrid version which stuck carbon on the side plate.

●It is sold by two （right and left) per set, respectively.

■ FRP version

■ Hybrid Version (Carbon + FRP)

The same design of STD,but it has extended to about 120 mm back. So mud or water splashes are sharply reduced by it.
And it looks still more offensively and racing style.

●Two lineup made from clear coated carbon and FRP.

■ Carbon Version

■ FRP Version

If this rod link is added to a STD link plate, rigidity will improve. And the modeling beauty of piping makes the rear suspension dress up more nearly mechanical.

The tandem step is located in the position where the optimal when it equips with LOUDEX Muffler, and the balance of design is also good. Within Z1 type tandem step.

●The rear step position changed comparing with the STD step, 75mm up / 28mm front.


●It made by carbon steel (STKM) pipe.

●It is sold by 2PC （right and left) per set, respectively.

It is the handmade product, welding and bending such as processing, polite one at a time.

●It made by carbon steel (STKM) pipe.

●The finish is two kind as satin chrome and black paint.

●It is sold by 2PC （right and left) per set, respectively.

The twist rigidity of the frame is improves. The pipe-work design which suits the frame of STD.

●It made by carbon steel (STKM) pipe and variation is 2 kinds, satin chrome and black paint.

●It is sold by 2PC （right and left) per set, respectively.

■ for Cylinder Head

■ for Cylinder Rear

It made by the traditional method of Japan. "The Pipe by hand bent", "The layout 4 in1","Made from steel".The Length and angle also imagined racing exhaust muffler for air cooled Z1, and were built.

●O.D. Exhaust pipe is 38mm.The skillful craftsman is manufacturing one of it at a time by handmade. The skilled craftsman is making one pipe at a time from handmade.

●Center collector is 4 in 1 layout and short pyramid type, since generate the torque of low - middle RPM range.

●JMCA model is suitable for the regulation of Japanese street. Catalyzer and efficient silencer are equipped, volume is made somewhat low, and Japanese inspection is suited.

●Racing model is the muffler for circuits.It is straight internal structure and sound is about 105 db.It upgrades about +6% from normal muffler.It has been blown at a stretch to high RPM range.

●This muffler can be exchanged equipped with engine oil and the oil filter.

The pipe made from aluminum with which the side of the radiator is ornamented.

●The rod is the design which used duralumin 2017 material and dug V type slot.

 

If it exchanges for this Fenderless Kit, it will become simple and stylish appearance.

●It suppresses 1 inch of overhangs to the outside of winkwe at inside.

●The 1.5mm SPHC steel cut down with the laser cutter is used. Special chromium processing which is excellent in corrosiveness-proof was carried out.


●The winker and license plate light are the designs which make it the double plate structure which served as reinforcement, and can use STD damper rubber.

 

This hole plug cover dress up the beautiful truss frame.
Moreover, it also prevent flood into the frame by washing etc.

●The design which used the wheel which runs as the motif.

●The material is aluminium and the finishl is alumite.

●It is sold by 2PC （right and left) per set, respectively.

②：By the individual specificity of the bike, there is the necessity of deleting the convex part welding part in a frame.

The "KAWASAKI" emblem made from plastic which attach to under stem. It is the easy fit kit with which the mount bracket required for attachment was also attached.

■ Stem Emblem & Mount Bracket Set

■ Stem Emblem Only

■ Mount Bracket Only